Everything you need to know about

Fridge Freezer

FAQ's

The hose that connects your Beko fridge to the water line comes in two pieces with a filter in between. The first hose is 1 m, and the second one is 4 m, adding up to 5 m in total length.

Your refrigerator may take up to 8 to 12 hours before it produces usable ice cubes.

 

The initial batches of ice cubes may have irregular shapes, colours, or other impurities especially if your refrigerator is a plumbed model. You may want to discard the first two or three batches before your appliance starts producing perfect ice cubes.

Your refrigerator needs at least 5 cm of free space on the sides, the top and at the back for proper ventilation.

Your refrigerator needs to stand level and balanced on its feet to function properly. Try rocking the appliance from side to side or back and forth. If it is wobbling too much, your flooring or the appliance's feet may be uneven.

 

Use a spirit level to check the appliance's balance. If it's off, adjust the feet by reaching under your refrigerator and finding the two front feet. Turn the feet clockwise or anti-clockwise, until they are firmly in contact with the floor.

Your refrigerator needs some time to settle before you can start using it. You should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle. 

 

You can plug your appliance in once 4 hours have passed. Make sure that the thermostat control is set to ON but don’t start loading food right away. Allow your fridge some time to cool down to temperatures safe for food storage, which might take up to 12 hours. 

 

Ideal refrigerator temperatures are 4 °C or 5 °C for the fridge and -18 °C for the freezer compartment. Check the temperature inside your appliance with an accurate thermometer. 

 

Place the thermometer inside a cup of water and put it inside the fridge compartment. To check freezer temperatures, do the same with the thermometer inside alcohol or cooking oil (because water would freeze). You can begin storing food when the desired temperatures are reached. 

Allow 24 hours for the refrigerator to cool down so that it can chill water properly. Also, the water dispenser needs to have the trapped air in the water line removed when it is first connected or every time the water filter is replaced.

 

Place a large container below the water dispenser and start pressing and releasing the lever for 5-seconds intervals. Repeat until water begins to flow. Once water starts flowing, continue pressing and releasing the dispenser paddle until a total of 15 litres of water has been dispensed. This will flush the air from the filter and the water dispensing system, ensuring pure and fresh water for drinking.

general-cta-image

We're here for you!

Whether you need product advice, went to purchase accessories or simply want to give feedback - we're here for you.

(888) 352-2356 Monday through Friday 8 a.m. - 5:30 p.m. CST

Need more support?

Find FAQ's, video guides, articles and more.