Thank you for your feedback
You just added this product to your wishlist.
You just removed this product from your wishlist.
You can't add more to wishlist
You can't add more to wishlist
Are you sure you want to clear your comparison?
Continue
You can only compare products from the same category.
You just added an item to compare! Keep going!
You just removed an item to compare! Keep going!
Your compare list is full!
You only added 1 product. Please add more products to compare

2 min read

How to fix hob flames that flicker or go out?

How to fix hob flames that flicker or go out?
How to fix hob flames that flicker or go out?

 

 

There are several reasons for your hob’s flames to flicker or go out. Please see if one of the following will solve the problem.

 

 

 

Make sure the burner heads and caps are placed properly

 

The burner heads and the caps need to be placed correctly for your hob to work properly. Make sure the correct cap is placed on the correct head, and the correct head on the correct burner. Also check that they lay flat and level. If the head or the cap is even slightly off-center or tilted, your hob may ignite slowly, unevenly or not at all.

 

For more information on your hob's burners and pieces, consult your user manual. If you’re having trouble finding your manual, download it here using your product’s model number.

 

 

 

See if the burner ports are wet or clogged

 

The burner ports which release gas may be clogged with food or wet from cleaning. This is probably the case if you notice the flames around the burner are uneven. Turn your hob off and wait for the burner caps to cool down. Once the burners are cool, clean the ports using a pin. Take care not to damage or distort the ports. 

 

 

 

Check for air circulation

 

Your gas hob’s flames may be flickering because your hob is exposed to a degree of natural air flow. Make sure your hob isn’t exposed to wind or sudden changes in air flow in your kitchen.

 

 

 

Make sure the gas source is appropriate

 

Gas hobs differ in the gas supply they use. Hobs that work with natural gas are wired differently than those that work with gas cylinders because these two sources operate at different gas pressures. Problems arise when a hob designed to work with natural gas is connected to a gas cylinder. Be sure to use the appropriate gas source for your hob to avoid any flame flickering or sudden flame bursts.

 

 

 

Consider technical problems

 

If the problem continues, your hob might have a technical problem. If you suspect this to be the case, contact an authorised service agent.

 

 

Rather talk to someone?