Thank you for your feedback
You just added this product to your wishlist.
You just removed this product from your wishlist.
You can't add more to wishlist
Are you sure you want to clear your wishlist?
Continue
You can only compare products from the same category.
You just added an item to compare! Keep going!
You just removed an item to compare! Keep going!
Your compare list is full!
You only added 1 product. Please add more products to compare
How can we help?

Select Product Select Issue .
How can we help?

Start Over

FAQ's

How do I replace the anti-scale cartridge on my iron?

The built-in anti-scale cartridge is designed to reduce limescale build-up that occurs over time. This will prolong the lifespan of your iron. The cartridge must be replaced after every 30 litres of water has been used up.

 

Most Beko steam generator irons have an indicator light to signal when the cartridge needs changing. Please use cartridges sold by authorised dealers and service centres only.

 

Remove the new cartridge from its package. Soak it in water for about one minute to enhance its performance. Unplug your iron and let it cool down before removing any parts. Press and release to remove the old cartridge from the slot and push the new one in. 

 

For more information on installing the anti-scale cartridge, please consult your user manual. If you’re having trouble finding your manual, download it here using your product’s model number.  

What type of water should I use with my iron?

Use only tap water with your iron. Your appliance is not designed to be used with drinking or distilled water. If your tap water is excessively hard, use a mixture of tap water with drinking water.

 

Do not pour perfume, vinegar or other liquids into the water tank. These can cause serious damage to your iron or clothes.

When should I use the water spray feature of my iron?

The water spray feature is ideal for ironing heavy fabrics or difficult areas like collars, sleeves and pockets. Sprayed water helps your iron to remove creases. 

Do I have to empty my iron’s water tank after every use?

You do not need the empty the water tank after every use. However, you should empty it if you are not planning to use your appliance for a long time.

How/where should I store my iron?

Unplug the iron and wait for it to cool down. Empty the water tank if you are not planning to use it for a long time.

 

Do not wrap the cable around the iron. You can wrap it around the cable winding slot if your model is equipped with one. Keep your iron on a stable surface.

 

Always keep your iron out of the reach of children.

Will my iron automatically turn off if it's not being used?

Your iron will automatically turn off if stationary for 30 seconds in the horizontal position and 7 to 10 minutes in the upright position.

 

Steam generator irons will turn off automatically if the iron is stationary or if no buttons are pressed for 10 minutes. 

How quickly will my iron be ready to use after plugging it in? How long does it take for an iron to heat up?

Depending on the set temperature, most modern irons heat up in just a few minutes. Once you plug in your iron and adjust the temperature, the thermostat indicator will light up. Your iron will be ready to use when the light turns off.

Where can I find my Beko iron's serial number?

Every Beko steam iron and steam generator iron have a unique serial number. It is located at the back of the appliance, below the point where the electrical cord enters the appliance body. 

Articles