If you want your drying cycle to end at later time, you can delay the start or set an end time to the selected program (depending on the model of your appliance). This is especially useful if the electricity or water cost is lower during specific hours of the day.
To set a delayed program, load your tumble dryer and select the program along with the additional functions you need. Press the End Duration/End Time (whichever is available on your control panel). You can now set when you want the drying process to finish and start your tumble dryer as usual. You can cancel the delay function by turning the appliance off and on again.
For Beko tumble dryers with Delayed Start buttons on their panels, you can set up a delay to the program start. Load your tumble dryer and select the program and additional functions as usual. Set the starting time by pressing the Delayed Start button (or the Delayed Start + or - buttons, if available). You can now start your tumble dryer. If you want to cancel the countdown and start the drying immediately, press the start button and decrease the time left until it reaches 0. Pressing the start button again will begin the program as usual.
If the panel has the Time Delay button with the numbers 3, 6 and 9, this means that you can set when you want the drying process to begin. A 3-hour delay is selected when the button is pressed once. If you press the same button again, a delay of 6 hours is selected. If pressed once more, the program will begin in 9 hours. If the Time Delay button is pressed one more time, the delay function will be cancelled.
After selecting the delay time, you can push start and the program will begin after the set delay.
For more information, head over to our guide on Beko tumble dryer programs and features.
Tumble dryers require a well ventilated, dust-free environment to function properly. We do not recommend using your tumble dryer in the garage.
Every Beko tumble dryer has a unique serial number. It’s located on the frame just inside the door.
Need More Help?