How to Connect a Beko Plumbed Fridge Freezer to a Demijohn
Connecting your plumbed Beko fridge freezer to a demijohn is an efficient way to ensure a
steady supply of water. Follow this simple step-by-step guide to get your fridge freezer
connected properly.
Step 1: Unplug the Fridge
Before starting any connections, unplug the fridge from the power source to ensure safety
during installation.
Step 2: Prepare the Water Pump
Use a water pump that is recommended by an authorized service for a carboy or
demijohn water connection. This pump is essential for the smooth transfer of water from
the demijohn to your fridge freezer.
Step 3: Remove the Connector
Locate the hose nozzle on the water valve at the back of your fridge. Remove the
connector from the hose and pass the hose through the connector. This will prepare the
hose for attachment to the pump.
Step 4: Tighten the Connector
Once the hose is passed through, tighten the connector on the water valve. You can do
this by hand or use a pipe wrench or pliers for a secure fit.
Step 5: Connect the Pump
Plug in the water pump and connect the hose to the pump. Ensure the connection is
secure by firmly pushing the hose into the pump.
Step 6: Insert the Pump Pipe into the Demijohn
Carefully insert the pipe of the pump mechanism into the demijohn and ensure it is
tightly closed. This step is crucial to avoid leaks and maintain proper water flow.
Step 7: Start the Pump
Once everything is connected, plug in the pump and start it. Wait for 3 minutes to allow
the water to flow from the demijohn to the fridge freezer.
By following these steps, your plumbed Beko fridge freezer will be successfully connected
to a demijohn, ensuring a continuous water supply for optimal performance.
