How To Clean a Beko Washing Machine Detergent Drawer
Keeping your washing machine in good shape starts with small routines, and one of the simplest is cleaning the detergent drawer. Over time, detergent, softener, and prewash products can leave behind residue that affects how well each compartment works. The good news is that cleaning the drawer is easy, and the steps are very clear. Below is a complete guide based entirely on the instructions shown in your images, explained in a smooth and helpful way.
A detergent drawer has three key functions. It holds the detergent that goes into your main wash, the fabric softener that keeps clothes comfortable, and the prewash detergent if you choose a cycle that uses it. Since all three compartments come into contact with different laundry products, they naturally collect leftover traces. Cleaning the drawer helps these products flow correctly and supports better washing performance day after day.
Step 1: Remove the Detergent Drawer
Start by pulling out the detergent drawer. According to the screenshot instructions, you can do this by pushing the small part inside the softener compartment. It is designed to release the drawer easily, allowing you to remove it without struggle. A gentle push is enough to trigger the release mechanism, after which you can slide the drawer out completely. Once removed, you will have full access to every section inside.
Step 2: Clean Every Part of the Drawer
With the drawer in your hands, focus on cleaning every part thoroughly. This means looking at the detergent compartment, the fabric softener compartment, and the optional prewash compartment. In the screenshots, the guidance is very clear: clean every part of the detergent drawer. Residues can form a thin film or small buildup on the surfaces, especially around corners or edges. Taking a moment to wipe these areas is the best way to make sure nothing remains inside that could block the flow of products during future cycles.
Step 3: Wash the Drawer Under Tap Water
Next, rinse the entire drawer under running tap water. The instructions mention washing it with water in tap, which simply means using your regular household tap. As the water flows, it helps dissolve leftover detergent and removes softener traces. It also clears any small particles that may have stuck to the surfaces. Rotate the drawer in your hands while rinsing so that water reaches every section. The simple flow of water is often enough to leave the compartments fresh and clean.
Step 4: Check the Drawer Before Replacing It
After rinsing, take a quick look at the drawer to ensure everything is cleaned properly. The instructions advise cleaning every part, so make sure no visible residue is left. If you still see small specks of detergent or softener, rinse again for a few seconds. It only takes a moment and guarantees the drawer is fully refreshed.
Step 5: Put the Drawer Back in Place
Once everything is clean, slide the drawer back into its original position. The instruction from the screenshot is very straightforward: put the detergent drawer in its place. Push it gently until you feel it sit correctly in the washing machine housing.
Regularly cleaning the detergent drawer keeps your washing machine running more smoothly. With these simple steps, taken directly from your screen captures, you can maintain your drawer easily and keep each wash cycle working the way it should.
If you would like, I can also prepare a matching blog for how to use detergents correctly or combine both topics into one longer guide.
