Washing Machine Leaking Here’s What You Should Check
A leaking washing machine can turn a regular laundry day into an unexpected clean up session. The good news is that many leaks come from simple issues that you can identify and fix quickly. By checking a few key areas on your washing machine, you can usually pinpoint the cause and prevent further leakage. Below is a clear and practical guide based entirely on the essential checks shown in your screenshots.
1. Start with the Water Connections
One of the most common reasons for leaks is a loose or incorrectly attached water hose. Before looking into anything else, take a moment to check both ends of your machine’s water inlet hose.
Begin at the tap. Make sure the hose is connected tightly, as even a slight looseness can let water drip down the wall and pool beneath the machine. Move to the back of the washing machine and confirm that the hose is also attached securely there. A good connection should feel firm without wobbling or gaps.
Once both ends are checked, take a quick look at the hose itself. Ensure it is straight, not twisted or bent, and inspect for any visible signs of damage. When everything looks correct, turn on the water supply and observe the hose area for a moment. If you do not see any leaks, you can move on to the next step.
2. Inspect the Door and Gasket
The door is another important spot to examine, especially on front loading washing machines. A leaking door usually means the door did not close fully during the cycle.
To prevent this, avoid overloading the drum. If clothes are pressed too tightly against the door, it may not latch properly. The door needs to close securely for the washing cycle to run without leaking.
Next, check the rubber gasket around the door. This seal keeps water inside during the wash and rinse stages. If it has lint, detergent residue, or small items trapped inside, it will not seal correctly. Wipe the gasket and the glass clean to ensure there are no obstacles that might create gaps.
3. Look at Your Detergent Usage
While it might seem unrelated at first, detergent can also be a reason for leakage. Using more detergent than needed can cause excess foam or spills around the detergent drawer.
Always keep an eye on the MAX marking inside the detergent compartment. Filling above this line increases the chance of spills, especially during the initial stages of the wash when water flows into the drawer quickly. Ensuring the correct detergent amount is an easy way to prevent overflow and dripping from the drawer area.
4. Review Everything Together
Once you check the water hose, the door and gasket, and your detergent levels, run a quick test cycle or turn on the water supply again to see if the leak continues. Most small leaks are solved after these steps, making them simple yet effective first checks before calling for service.
